Upload a File
|
|
|
|
| Model |
[•] Hylo.01 |
|
|
| Category |
[ ] Installation |
[•] Operation |
[ ] Maintenance |
Summary
The procedure that follows gives instructions on how to upload a .gcode file on the AON3D Hylo machine.
There are three different ways to upload a G-code to the machine:
Estimated time: 2 minutes
None required.
None required.
Personal Protective Equipment
None required.
Upload a G-code
From Basis™ Environment
A network connection is required for the files to be visible between the machine and the Basis™ Environment.
- Log in to your Basis™ Environment.
- Select
Projects on the left-side menu.
- Select
+ Create on the right top corner.
- Input the requested information and select the file. Select
Create.
- Wait for the project to load.
- On the machine graphical user interface (GUI), navigate to the Files tab and select
Basis. Verify that the file is visible in the project folder.
From a Web Browser
- Connect to your machine using a web browser.
- On the web browser, select
Files.
- Select
+ and Upload to import the .gcode file onto the AON3D machine.
From a USB Key
- Put a FAT32-formatted USB key into the computer.
- Download the .gcode file to the USB key root folder.
- When the files have been successfully downloaded, safely eject and remove the USB key from the computer.
- Put the USB key into the machine USB-A port located under the machine screen.
- On the graphical user interface (GUI) navigate to Files tab and press
LOCAL STORAGE.
- Select the
USB folder to browse the .gcode files on the USB key.
- The USB key must remain into the machine for the duration of the print.