AON3D machines use a firmware based off of the popular Marlin firmware project. Many of the G-code and M-code commands are similar in functionality, but with subtle, yet important differences.
Refer to the Program Codes Guide for details on all G-code and M-code commands used to operate the AON3D machine.
While it is not necessary to be familiar with all the details of G-code and M-code for day-to-day usage, the aspiring power-user will find it invaluable to develop a solid grasp of the fundamentals for developmental work, detailed optimization, or advanced troubleshooting.
Refer to the Program Codes Cheat Sheet for an overview of all the G-code and M-code commands used to operate the AON3D machine.
The use of a slicer other than Simplify3D® to generate .gcode files can cause unintended bugs/errors that can cause a print to be unsuccessful and/or can cause damage to the AON3D machine.
AON3D only supports the use of Simplify3D® to generate .gcode files. However, the user is free to use a slicing software of their choice. For an overview on how to use Ultimaker Cura with the AON3D, refer to Ultimaker Cura guide.
To reduce the risk of bugs, make sure that the .gcode files generated by other slicers: