Filament, Spares & Accessories
Filament
The quality and printability of the below thermoplastic filaments have been verified and tested on the AON-M2.
As an open materials platform, we are always looking to add to the list, and will add more filaments as we test them.
Please contact our Customer Success team at help@aon3d.com for special pricing.
| Materials |
Supplier |
| ABS |
AON3D |
| ASA |
Filaments.ca |
| HIPS |
AON3D |
| CF Nylon (Novamid ID 1030 CF10 PA6/66) |
DSM |
| Nylon |
Dupont™ Zytel® |
| Polycarbonate |
SABIC |
| ULTEM™ 9085 |
SABIC |
| PEKK + CF PEKK |
Kimya |
| PEEK + CF PEEK |
Solvay |
| PPSU |
Solvay |
| AquaSys™120 |
Infinite Material Solutions |
| ULTEM™ Support (AMS31F) |
SABIC |
Spares and Accessories
Official common AON-M2 spare parts and accessories.
Please contact our Customer Success team at help@aon3d.com for price and quantity inquiries.
- Simplify3D License (slicing software)
- Heater block assembly with 0.25 mm hardened steel nozzle installed
- Heater block assembly with 0.3 mm hardened steel nozzle installed
- Heater block assembly with 0.4 mm hardened steel nozzle installed
- Heater block assembly with 0.6 mm hardened steel nozzle installed
- Heater block assembly with 0.8 mm hardened steel nozzle installed
- Heater block assembly with 1.0 mm hardened steel nozzle installed
- Heater block assembly with 1.2 mm hardened steel nozzle installed
- Nozzle Cleaning Wiper Blade
- Low-Scratch Nozzle Cleaning Brush
- Coolant Concentrate
- AON-M2 High-Temperature Build Plate (for PEEK, PEKK, and Ultem prints)
- AON-M2 Aluminum Build Plate (for use with Kapton tape)
- Polyimide Tape (Kapton), 6" wide, 0.0035" thick,15' Roll
- Dimafix Pen (Applied Adhesion Aid)