This section will help you get familiarized with the Graphical User Interface (GUI) of the AON3D machine.
AON M2+ (CE), AON M2+ (R-NZ) and AON M2+ machines with application version from version 45dccb0 and up have a Klipper-based firmware installed. Refer to the Graphical User Interface (Klipper) guide for more information on the graphical user interface.
Machines with application version v2022.07.04.21.14 and below have a Marlin-based firmware installed. Refer to the Graphical User Interface (Marlin) guide for more information on the graphical user interface.