Footprint Requirements

The AON3D machine needs additional clearance for the list that follows:
• Operator safety.
• Maintenance procedures.
• Filament changes.
• Correct airflow.

When the AON3D machine is in operation, the recommended clearances are as follows:

Dimension Machine Panel
50 cm (19.7 in) Front (with build chamber door open)
50 cm (19.7 in) Rear
50 cm (19.7 in) Left and Right
150 cm (59 in) Top

AON-M2 Recommended Clearances

Minimum Clearances

When the AON3D machine is in operation, the minimum necessary clearances are as follows:

Dimension Machine Panel
50 cm (19.7 in) Front (with build chamber door open)
50 cm (19.7 in) Rear
50 cm (19.7 in) Left
5 cm (2 in) Right
68.5 cm (27 in) Top

Or:

Dimension Machine Panel
50 cm (19.7 in) Front (with build chamber door open)
50 cm (19.7 in) Rear
5 cm (2 in) Left
50 cm (19.7 in) Right
68.5 cm (27 in) Top

AON-M2 Minimum Clearances


Last modified: March 7, 2024