Calibration Guide

This section covers the calibration procedures for all AON-M2 machines. The AON-M2 uses a software offset to calibrate all three axes, and two probes, to create a map of the build platform.

Calibration Task AON M2+ (CE) AON M2+ (R‑NZ) AON M2+ AON‑M2 2020 AON‑M2
Z Offset Calibration (AON M2+ Klipper)
Z Offset Calibration (AON M2+ Marlin)
Z Offset Calibration
X/Y Toolhead Offsets Calibration

Last modified: April 9, 2024