Tool Requirements

Summary

The tools that follow are needed for installation and/or maintenance procedures on the AON3D machines.

Tools

Qty Description Specification
1 Computer Windows, Mac OS, or Linux. Internet-ready
1 Static Discharge Bracelet Optional
1 Card Reader, SD Adapter
1 Sonic Tension Meter Gates Unitta Asia U-508C
1 Sonic Tension Meter Gates Unitta Asia 550C
1 High Temp Grease Gun and Empty Cartridge Kit K-0999-002
1 Camera, Digital N/A
1 Work Light Portable
1 Parts Pick Non-ferrous, small
1 Screwdriver Phillips, No.0
1 Screwdriver Phillips, No.2
1 Screwdriver Flathead, small
1 Screwdriver Flathead, large
1 Scraper, Metal Sharp edge
1 Scraper, Plastic Thin, Flexible
1 Pliers, Long 90° angle
1 Pliers, Locking Vise-Grips®, small
1 Wire Cutters N/A
1 Knife, Putty Plastic
1 Knife Box Cutter
2 Screws, Wood 1 inch length, Phillips, No.2
1 Sander, Electric Orbital
A/R Pads, Sanding 120, 180, & 220 grit
1 Broom and Pan N/A
1 Vacuum Cleaner, Shop Optional
1 Vacuum Pump, Manual N/A
1 Air Compressor 15 psi (maximum)
1 Tubing Rubber, 1/4 inch (6.4 mm) ID x 2 ft. (600 mm)
1 Mallet Hard rubber
1 Hammer, Claw Optional
1 Wrench 10 mm
1 Wrench 8 mm
1 Wrench 7 mm, open
1 Wrench 5.5 mm
1 Wrench 1/4 inch
1 Wrench, Socket 1/4 inch drive
1 Wrench, Torque 0-10 Nm range
1 Hex Drive Bit 3 mm
1 Hex Key 5 mm
1 Hex Key 4 mm
1 Hex Key 3 mm
1 Hex Key 2.5 mm
1 Hex Key 2 mm
1 Hex Key 1.5 mm
1 Hex Key 5/64 inch
1 Machinist Block 1-2-3 inch, standard issue
1 Straight Edge 2-foot length
1 Spirit Level N/A
1 Feeler Gauge 0.003 inch (0.076 mm), blade-type
1 Vernier Calipers 6 inches minimum
1 Brush, Wire Brass, soft bristle
1 Brush, Wire, Scrub Nylon, flexible scrub
1 Brush, Grease Applicator N/A
1 Bucket 3 liters minimum
A/R Spray Bottle Filled with soap and water
A/R Degreaser Spray Nine®, Permatex®
A/R Isopropyl Alcohol 99%
A/R Rags Lint-free

Last modified: March 7, 2024