Hylo™
Before you can make use of your machine, read through each of the sections. When you are ready to use the machine, you can use the search bar to the left to help you find specific articles to refer to.
- Getting Started
- Operation
- Quick Start Guide
- Replace Filament
- Replace Hot End
- Upload a File
- Install Build Platform
- XYZ-Axes Offset Calibration
- Maintenance
- Printing
- Buy Parts
- Download Files
If you do not find the answers to your technical questions here, contact AON3D’s Customer Success Team by email at help@aon3d.com and we will reply as soon as possible.
Specifications
| Build Volume (HxWxD) | 450 mm x 650 mm x 420 mm (17.7 in. x 25.5 in. x 25.5 in.) |
| Dimensions (HxWxD) | 1892 mm x 1296 mm x 870 mm (74.5 in. x 51 in. x 34.3 in.) |
| Crated Dimensions (HxWxD) | 2083 mm x 1499 mm x 1067 mm (82 in. x 59 in. x 42 in. ) |
| Weight | 523 kg (1154 lbs.) |
| Weight (Crated) | 683 kg (1506 lbs.) |
| Voltage | 208-240 VAC, 1-phase (L1, L2/N) |
| Frequency | 50/60 Hz |
| Current | 50 Amp |
| Maximum Power at 240 VAC | 12 kW |
Overview
Applicability
Applicability is from SERIAL NO H230030 and up.
Front of Machine
- Cold Plenum Hood
- E-Stop
- Graphical User Interface (GUI)
- Door
- Drawer
- Filament Management System
- Leveling Feet
Back of Machine
- Cold Plenum Rear Fans
- Nameplate
- Main Disconnect Switch
- Power Cord
- Ethernet Port
- Compressed Air Inlet
Sides of Machine
- Door Latch Override
Inside of Machine
- Chamber Camera
- Purge and Inspection Drawer
- T0
- T1
- X-Axis
- Vacuum Chuck