Z Calibration Tab
The Z Calibration tab allows the user to calibrate the Z-axis.
- Z Offset
- Tool Adjustment Distance
- Adjust Printing
- Calibrate
- Tool Select
- Probe Temperature Check
- Matrix Settings
- Bed Mesh
For detailed Z Calibration instructions refer to Z Offset Calibration (AON M2+).
Z Offset
Shows the current Z offset value for the active toolhead.
Tool Adjustment Distance
Selects the tool adjustment distance. The currently selected adjustment distance is highlighted in black. Touch the adjustment distance to select it. The distances that follow are available:
- 0.05 mm
- 0.1 mm
- 0.2 mm
Adjust Printing
Moves the selected tool the selected distance.
- Touch the Farther button to move the bed farther from the tool by the selected distance.
- Touch the Closer button to move the bed closer to the tool by the selected distance.
Calibrate
Control to start or stop probing.
- Touch Start to start probing the bed.
- Touch Stop to stop probing that is in progress.
Tool Select
Selects the tool to use for the probing process. The currently selected tool is highlighted in black. Touch the tool to select it.
Probe Temperature Check
Enables or disables the verification of temperature before the probing is started. Touch the toggle to switch between enabled and disabled. This feature is enabled by default.
- When the feature is ON, the toggle is green.
- When the feature is OFF, the toggle is gray.
Matrix Settings
Settings that can be modified in the bed mesh view.
Bed Mesh
Displays the bed mesh of the select tool. If no bed mesh is displayed, calibration is required.