The information that follows provides the customer with operating environment guidelines.
The AON-M2 machines operate in an ideal environment of 15°C to 25°C (59°F to 77°F).
The AON-M2 machines have a maximum heat load of 8,000 BTU/hr.
The AON-M2 machines operate in a relative humidity environment of 30-60%, non-condensing.
Do not operate the AON3D machine in areas where electromagnetic interference (EMI) or radio-frequency interference (RFI) are present. Failure to comply can result in personal injury and/or damage the machine.
Examples of EMI and RFI are, but not limited to:
• High-powered radio devices
• Industrial motors
• Power line towers
• Microwave ovens
It is the sole responsibility of the customer to comply with all their local, regional, state, or national regulations that may apply specifically to their given situation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.