Footprint Requirements
Recommended Clearances
When the AON3D machine is in operation, the recommended clearances are as follows:
| Machine Panel | Clearances |
|---|---|
| Front | 1219 mm (48 in) |
| Rear | 610 mm (24 in) |
| Left | 610 mm (24 in) |
| Right | 610 mm (24 in) |
| Top | 820 mm (32.4 in) |
The recommended spatial envelope for the machine is as follows:
| Dimension | Values |
|---|---|
| Width | 2500 mm (98.4 in) |
| Depth | 2605 mm (102.6 in) |
| Height | 2740 mm (108 in) |
Minimum Clearances
The operator must have access to the rear of the machine to activate and deactivate the Lockout/Tagout (LOTO) switch.
Minimum clearance do not include sufficient space for some preventive and corrective maintenance tasks.
The AON3D machine needs additional clearance for the list that follows:
- Operator safety.
- Maintenance procedures.
Refer to the Recommended Clearances for recommended dimensions and footprint.
When the AON3D machine is in operation, the minimum necessary clearances are as follows:
| Machine Panel | Clearances |
|---|---|
| Front | 914 mm (36 in) |
| Rear | 610 mm (24 in) |
| Left | 152 mm (6 in) |
| Right | 152 mm (6 in) |
| Top | 820 mm (32.4 in) |
The minimum necessary spatial envelope for the machine is as follows:
| Dimension | Values |
|---|---|
| Width | 1584 (62.4 in) |
| Depth | 2300 mm (90.6 in) |
| Height | 2740 mm (108 in) |
